Growth of preferentially-oriented AlN films on amorphous substrate by pulsed laser deposition

Preferentially-oriented aluminum nitride (AlN) films are grown directly on natively-oxidized Si (100) substrate by pulsed laser deposition (PLD) in nitrogen (N₂) environment. The AlN preferential orientation changes from (002) to (100) with increasing N₂ pressure. Such different behaviors are discussed in terms of deposition-rate-dependent preferential orientation, kinetic energy of depositing species and confinement of laser plume. Finally, sample deposited at 0.9 Pa is proved to have the highest (002) peak intensity, the lowest FWHM value, the highest deposition rate and a relatively low RMS roughness (1.138 nm), showing the optimal growth condition for c-axis-oriented AlN growth at this N₂ pressure.     

Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan

This study investigates the use of both amplitude and time-of-flight based pulsed ultrasonic polar scan (P-UPS) as a sophisticated non-destructive damage sensor for fiber reinforced composites. Focus is put on stiffness related damage phenomena, which are in general difficult to monitor nondestructively, and their associated signature in the P-UPS image. Various composite samples, with different damage states, have been inspected at multiple material spots with the P-UPS technique. The results demonstrate the capability of the P-UPS method to obtain a unique signature of the local material damage characteristics. Several indicators in the acquired P-UPS images have been identified from which the type and level of material degradation can be obtained. The P-UPS extracted characteristics are fully supported by simulations, conventional tests as well as visual inspection.     

Interaction of a screw dislocation with a notch in a piezoelectric bi-material

Summary The electro-elastic interaction of a screw dislocation and a notch in a piezoelectric bi-material is analyzed. The electro-elastic fields induced by the dislocation are derived using the conformal mapping and the image-dislocation approach, where the solution for a piezoelectric bi-material without a notch is used as a base. The stress and the electric displacement intensity factors of the notch and the image force on the dislocation are given explicitly. We find that intensity factors are expressed in terms of the effective material constants, while the radial component of the image force is independent of the notch angle and the angular position of the dislocation in the polar coordinate system. Numerical results for the image force are provided for the use when one of the two media is purely elastic. They illustrate the behavior of the dislocation in the neighborhood of the notch.     

Simultaneous determination of 11 related impurities in propofol by gas chromatography/tandem mass spectrometry coupled with pulsed splitless injection technique

A variety of related impurities, including starting materials, process impurities, and degradation products, can be detected in propofol. In this article, a sensitive and selective GC‐MS/MS method using pulsed splitless injection technique for the determination of 11 main related impurities in propofol in one chromatogram is investigated. This method is extensively validated for its linearity, recovery, precision, LOD, and LOQ, and is able to detect trace‐level related impurities (LOD = 0.2–5.6 μg/g) in propofol bulk drug. Stressed tests proposed that oxidative degradation, photolytic degradation, and heat are the main causes for the formation of degradation products in propofol.     

Photoacoustic monitoring of the mass removed in pulsed laser ablation

The mass Δm removed per pulse in laser ablation was shown to correlate with the acoustic signal A and the beam diameter ?. The functional forms of Δm(A, ?) were deduced for aluminum and polyvinyl chloride, for fluence ranging from 1.5 through 88 J cm^{− 2}. Δm so computed agreed with empirical values within experimental error. For samples whose mass is sensitive to environmental factors, off-line measurement of Δm was shown to be unreliable and real-time measurements such as acoustic monitoring became essential.     

Oxygen deficiency in oxide films grown by PLD

The incorporation of oxygen atoms in oxide films grown by pulsed laser deposition depends upon the oxygen pressure and laser power density. By carefully controlling these two parameters it is possible to control the oxygen deficiency in the samples, and thus to change their physical properties from insulating and transparent to absorbing and conducting. By using X-ray diffraction, Rutherford backscattering spectroscopy and resistivity measurements, we show that depending upon the oxide materials oxygen deficiency in the films can induce either the growth of stable sub-oxide phases or the formation of nanocomposite films by phase separation. The first case corresponds to oxides with a mixed valency cation like Ti, which leads to the formation of stable, crystalline and highly conductive TiO_x sub-oxide phases. The second case is well described by the indium tin oxides (ITO) in which a large oxygen deficiency leads to metallic clusters embedded into a stoichiometric matrix, i.e. nanocomposite films. This phenomenon is due to the fact that sub-oxides of these compounds are not stable and thus the oxygen deficiency induced a phase separation.     

Preparation and characterizations of amorphous nanostructured SiC thin films by low energy pulsed laser deposition

Amorphous silicon carbide (SiC) thin films were deposited on silicon substrates by pulsed laser ablation at room temperature. Thicknesses and surface morphology of the thin films were characterized using optical profilers, atomic force and field emission scanning electron microscopy. Nanohardnes, modulus and scratch resistance properties were determined using XP nanoindenter. The results show that crack free, smooth and nanostructured thin films can be deposited using low laser energy densities.     

采用新型La_(0.07)Sr_(0.93)SnO_3电极制备外延透明BiFe_(0.95)Mn_(0.05)O_3铁电薄膜电容器

本文使用脉冲激光沉积的方法在SrTiO3(STO)单晶衬底上采用一种新型的透明导电氧化物材料La0.07Sr0.93SnO3(LSSO)薄膜作为电极材料制备了BiFe0.95Mn0.05O3(BFMO)铁电薄膜电容器.XRD表征结果证实BF-MO/LSSO/STO外延异质结具有很好的单晶质量.光透过率的测试结果表明在500~2500nm的波长范围内,整个异质结的透光率与单纯STO衬底基片相似.在波长500nm附近BFMO出现吸收边,通过对吸收边进行(hνα)2-hν曲线拟合得到BFMO的直接光学带隙约为2.8eV.利用Pt作为上电极,我们测得了饱和的电滞回线,剩余极化Pr~60μC/cm2.     

Scattering experiments on the structure of concentrated dispersions

 In this work the Couette cell is compared with a more recently constructed disk shear cell. There are distinct advantages of the disk over the Couette cell, in particular, when it comes to the determination of the intensity along certain Bragg rods. Received: 12 December 2000 Accepted: 31 January 2001